Using the included T-5 screwdriver remove the four screw from the Case where indicated.

Using your finger pry open the case starting with one of the bottom corners of the PDA and work your way around the case. The front case cover should easily unsnap from the rest of the PDA.

With the front cover removed, we can be remove the two screws holding the motherboard in place. Use the included screwdriver remove the other two screws.

Flip the motherboard according to the diagram to the left to give access to the battery. The motherboard should still be attached to the case by a cable. Be very careful when moving the motherboard as the navigation wheel and other small parts can be damaged.

Using your finger or the tip of the screwdriver, carefully pull on the power cable plug. Once unplugged, you can remove the battery battery from the PDA.

please pay attention to the original orientation (power cable towards the bottom of the PDA). Connect the power cable of the new battery by positioning it within the socket, pushing it in. Apply the new battery to the original glue spots within the battery compartment.

Put the motherboard back within the guides and put back the two screws. Snap on the front cover and put back the four screws.

Your new battery will need a minimum of three hours of charging before first use

.