BB-BP1.2-12 T1 rechargeable 12v 1.2ah battery replacement AGM.
Replacement BB-BP1.2-12 T1 batteries, rechargeable valve regulated sealed lead 12v 1.2ah non-spillable battery, no maintenance, available at low, competitive price direct from the warehouse.

• BB BP1.2-12 T1 battery replacement

Even though the batteries you receive from us will be almost fully charged, you should still complete a full charge before first use. If it's going into a device that is always connected to the mains, like a battery backup for monitoring or an alarm system, then you can miss this step as it will do it for you. Your charger will indicate to you when it has completed a charge. It will probably not take very long. Depending on the charger, the light will generally change to show it's ready. You may want to fit them and use the equipment, but do not miss this first step if needed. It's worth waiting until the first charge has been completed, and it may well contribute over life.

Most users will not notice, but it will take several charges and associated use in your equipment before they can accept a full capacity charge. This is quite normal and part of the conditioning process. When you have used your portable devices, put the batteries back on charge. You do not want to allow them to sit in a partially discharged state. Never try to discharge the batteries down. Doing so with this type of battery will only reduce the life span and cost you money in the long run. If you are not using them for long periods, then you should recharge every six weeks but do not leave them on the charger for more than twenty-four hours at a time.

These are 12v valve-regulated sealed lead acid batteries and will not leak. They are both AGM and VRLA. of course, they are the required deep cycle kind, and they are not hazardous, so they are safe for use in portable equipment, medical and indoors.

We have provided the information here only as a guide. You need to check the code carefully as so many of them are similar, so it's easy to make a mistake. You will also find we have listed the relevant dimensions so you can make sure you are ordering the correct one. Looking at your old power pack and taking note of the measurements and anything that may be printed on the side is probably the wisest thing to do. This 12v 1.2ah product is recyclable. It is made mainly of lead which is easily transformed. Please ensure they are disposed of properly at a recycling centre once they have completely fulfilled their practical purpose for you. More information about recycling can be found at the foot of this page.

Voltage = 12v
Capacity = 1.2Ah @20Hr
Chemistry = AGM, VRLA, Pb

There is a total of 1 rechargeable and recyclable battery for the BB BP1.2-12 T1. The physical size of the individual batteries is as follows:
Length = 97mm or 3.81-inches
Width = 43mm 1.69-inches
Height = 52mm or 2.04-inches