Powertron PE6V12RF1 battery replacement 6V 1.2Ah sealed AGM
Replacement Powertron PE6V12RF1 non-spillable sealed lead-acid valve-regulated 6-volt 1.2Ah batteries, AGM and VRLA.
Here you will find detailed information to help you make an informed decision about purchasing a replacement compatible battery for your Powertron PE6V12RF1.
- Powertron PE6V12RF1 battery replacement
The batteries will be delivered fully charged; however, it is recommended to charge them before use. If the battery is meant for a device that is constantly connected to the mains, such as a monitor or an alarm system, you do not need to charge it first, as the device will manage that itself. The initial charge period before use should last only until the charger indicates the battery is ready, which shouldn't take long.
While it may be tempting to use the equipment without charging first, it's advisable to wait until the battery is fully charged to help extend its overall lifespan. Be sure to charge your new compatible Powertron PE6V12RF1 battery upon arrival and before first use. If the battery will not be used for an extended period, recharge it monthly to maintain cell health. Additionally, recharge the battery as soon as possible after each use, as leaving it discharged is not good practice.
These AGM (Absorbent Glass Mat) and VRLA (Valve-Regulated Lead-Acid) batteries can be used in portable devices and mounted on their sides.
Voltage = 6-volts
Capacity = 1.2Ah @20Hr
Chemistry = VRLA, AGM, sealed lead, Pb.
There is 1 rechargeable battery for the Powertron PE6V12RF1. The physical size of the individual batteries is as follows:
Length = 97mm or 3.81 inches
Width = 25mm 0.94-inches
Height = 52mm or 2.02 inches.
Ask about batteries
