Pair of 75mm cables - ring to Faston F2 female connectors

Two 75mm long cables with 5mm ring terminating to Fastin F2/T2 female terminal, 5mm Nut, bolt washer, and shrink tube.

Quite often, imported goods from china might come in with a battery with a screw down rather than an F2 terminal as would normally be found on some sized batteries.

Now you would be hard-pressed to find a battery with the correct terminals and even harder to find a good quality one, so this little hack solves the problem.

You join the existing ring with the one on the new cable and use the nut and bolt to attach them together. Then slip over the supplied shrink tube, apply some heat from a heat gun or even a hair dryer to allow it to shrink around the join, and that is it. After that, whenever you need to change your batteries in the future, you can just use the more widely recognised Flat spade batteries.

This offer is for two cables to fit one battery; if you have more, add the requisite number of times to the cart.

We use these often on equipment that comes in with 10ah or 12ah batteries from the far east. but of course, they have other uses too.