Sealake-FM1290 battery 12v 9ah nut and bolt.
Replacement Sealake FM1290 compatible battery, with upright nut and bolt terminals, 12v 9ah.
We have probably seen this battery most often in small jumpstart packs and equipment with smaller engines, such as lawnmowers, petrol generators, and the like.
The terminals are turned, but this should not cause any issues. You will not know that this battery has the required nut and bolt fixing to attach your cables to. It comes with new nuts and bolts.
Looking after your new replacement, the Sealake FM1290 battery will pay dividends in the long run. Charge entirely when it arrives and first use (although you will find it's probably almost fully charged); if it is not being used regularly, recharge every six weeks to keep the cells fresh. It will take several uses in the equipment before the battery is conditioned enough to accept a full-capacity charge; this is quite normal. Remember that replenishing the energy lost when you start the engine will probably take thirty minutes.
This is the correct battery size and terminals for the Sealake FM1290.
Battery Type: VRLA, AGM, sealed lead.
Voltage: 12v
Capacity = 9ah
Terminals = M5 nut and bolt, upright flag type. See the battery picture above.
The physical size of this replacement Sealake FM1290 battery is as follows:
Length – 151mm
Width – 65mm
Height – 94mm, 106mm with the terminals.
