Genie 1309746GT 6-EVH-100 battery replacement 12v 100ah AGM.
High quality compatible battery to replace Genie 1309746GT or 6-EVH-100, 12v 100ah AGM battery for electric scissor lifts.
This compatible replacement matches the Genie 1309746GT, also listed under the cross-reference code 6-EVH-100, a 12V 100Ah sealed AGM battery built to take over from a worn original without any change in fit or performance. It's supplied as a single unit, so if your lift's pack is built from several of these wired together, just order however many you need to bring the whole set back up to strength.
- Genie 1309746GT battery replacement
- 6-EVH-100 battery replacement
As a sealed AGM battery, there's no topping up or electrolyte to check, so it drops straight into the pack in place of the old unit. The lift's onboard charger will take it up to full and switch over to a maintenance float charge on its own, meaning it's safe to leave plugged in overnight. Make it a habit to charge fully at the close of every shift instead of leaving it partly discharged, and if the machine goes into storage, give the battery a top-up charge roughly once a month so it doesn't sit in a deep-discharge state, which shortens the working life of any AGM cell.
Once this battery has finally given up its charge for good, don't bin it with ordinary rubbish. AGM batteries share the same recoverable lead-acid chemistry as flooded and GEL types, so the lead, casing and electrolyte all go back into standard battery recycling streams, and most equipment suppliers or recycling points will take the old unit off your hands when the replacement goes in.
Voltage: 12v
Capacity: 110ah @20hr
Chemistry: AGM
Terminals: M8
Dimensions:
Length: 329mm
Width: 173mm
Height including terminals: 209mm.
