APC Fujitsu Smart-UPS FJT1500I battery replacement 1500VA.
Replacement FJT1500I Smart-UPS batteries for this APC, Fujitsu 230V 1500VA unit often used in small offices at low competitive costs.
If your low battery LED light is on and warning you to change the batteries you should take action before it’s too late. UPS systems protect your data therefore making them important and replacing them is fairly easy and doesn’t take long.
- APC FJT1500I battery
- Fujitsu FJT1500I battery
When installing your new batteries the first thing to do is to make sure you disconnect from the main supply and the network. It will be pretty simple to replace and you will only need a screwdriver and some patience, open it up, unplug the batteries, slide them out and install the new batteries.
Your brand new batteries will arrive almost fully charged but we suggest once they are installed you allow the Uninterruptible power supply system to recharge the batteries as you will not have complete protection until this is done, this process shouldn’t take longer than 3 hours.
This is a pack of two sealed lead acid, non-spill, not-hazardous, maintenance free VRLA 12v 18AH batteries to directly replace your existing batteries. While we do our best to keep this data as accurate as possibly it should only be used as a guide and if you are unsure what you need the best thing you can do is simply have a look at what you already have and compare with the information on this page.
The below information is for one battery however you will receive two when ordering
Voltage – 12v
Capacity – 18ah
Length = 181mm or 7.13-inches
Width = 77mm or 3.03-inches
Height = 165mm 6.50-inches
