Belkin Omniguard 2300 battery replacement UPS
Replacement Belkin Omniguard 2300 battery pack, rechargeable compatible AGM UPS batteries at low cost.

• Belkin Omniguard 2300 battery

Installing the new batteries into the Belkin Omniguard 2300 UPS is not a difficult job, certainly well within the reach of most people. You can refer to your user manual for the method if required. They are designed to be replaced. The ones we send to you will be almost fully charged, but UPS will still complete a service charge upon installation. Please note that while this is happening, the system will not be able to provide the full backup runtime until it's finished. You will find it's better to let the system run without a load to start while it completes the first charge, which resets the new battery's energy level.

When fitted with a Belkin Omniguard 2300 UPS, you can expect a battery lifespan of 2 to 5 years. Supplying adequate ventilation is important. The batteries are being continuously used 24/7. The hotter they are allowed to get, the shorter their life expectancy. If you can keep the constant load below 40%, the batteries will last longer. A high load will come at the expense of the cells' overall life expectancy.

Check the code on your Belkin Omniguard 2300 UPS to ensure you are ordering the correct battery set. So many codes are very similar; it's easy to make a mistake. The battery sizes are also specified below. If you are unsure, the batteries are recyclable. More information about recycling can be found at the bottom of this page.

Voltage = 12v
Capacity = 7Ah @20Hr
Chemistry = Pb, sealed lead, VRLA, AGM
Hot swap capable.

This offer is for a set of 4 batteries for the Belkin Omniguard-2300 UPS. The overall size of each battery is as follows:
Length = 151mm
Width = 65mm
Height = 94mm.

As an easy upgrade path, we can offer this Belkin Omniguard 2300 battery in a 9Ah version. It will slip straight into the same cavity but offer you a longer runtime. The link to this will be in the easy upgrades above.