Skip to Main Content

APC BK200 UPS battery pack replacement sealed lead VRLA

£59.98 inc. VAT now £41.40 inc. VAT

Images for assistance only.
Share This Product
  • Model:BT640X2-36790
  • Battery Charge:Rechargeable
  • Battery Voltage:6.00 Volts
  • Battery Capacity:4.50 Ah
  • Battery Chemistry:AGM
  • Condition:New
  • Pack Contains:2
  • Shipping Weight:1.70 Kilos

APC BK200 UPS battery pack replacement sealed lead VRLA
Replacement APC BK200 battery pack, rechargeable valve regulated sealed lead acid UPS batteries, will not spill, safe not-hazardous at low prices direct from warehouse

Here you will find we have detailed the information to help you make the decision of purchasing a new set of batteries for your APC BK200, Your UPS utilises the batteries to help filter the mains supply and output a clean version without any spikes or surges as well as offer you runtime back up energy the cells are 6v cells, and comes with 2 x 6-volt batteries which is what the offer on this page is which are as required rechargeable, they are safe, not-hazardous and will not spill, they are working hard the entire time the equipment is switched so they do a lot of work over the years

  • APC BK200 battery replacement

The task of installing the batteries is not a difficult one, you should refer to your manual for the full method, once you have them in the system it will fully charge them, even though they will come out to you almost charged it will still need to complete this task, this of course means that until its finished you will not have a full backup runtime, we know it may not be convenient as everything is completed a rush but if you can its best to run the system without any load to start

Battery life expectancy is between two to five years in this UPS, this will however differ quite a lot depending on the use, make sure it has good ventilation, the batteries will get hot in general use, the hotter they are the shorter the life span, do not pile books on top of it, also do not overload with to many devices, if you can keep the load below 40%, while the system may be of going higher than that its working the battery cell harder which means a shorter life span

The battery type is AGM or absorbed glass mat construction, they are also valve regulated, they means they can be used in tower or rack mounted UPS systems without the fear of any leakage, they will require no maintenance throughout their entire life span and are not-hazardous so safe for use in busy data centres and of course the home office

Check the code on your system carefully so you order the right battery set a lot of the codes are very similar so it's easy to make a mistake, the batteries are made mainly from lead and recyclable, more information on recycling can be found at the foot of this page.

Voltage = 6-volts
Capacity = 4.5Ah @20Hr
Chemistry = Pb, sealed lead, VRLA, AGM
Hot swap capable

There are a total of 2 batteries for use in the APC BK200 we have listed the size of each battery below
Length = 70mm
Width = 48mm
Height = 102mm
Battery layout - from chart below = 1

BK200 battery layout guide


Frequently Asked Questions

Ask us a question

There are no Videos for this particular Product.
View our other help, technical, installation and information videos.

Installation Videos

We do have other Videos, subscribe to our Youtube Channel using the Button below.
Supplementary Files: None available

  • 98% of orders shipped same day for next day working day delivery in UK Mainland
  • FREE Delivery on orders of £45 and over in most of UK Mainland
  • We ship Worldwide, add to cart for delivery cost
  • You can return any order for any reason, in resaleable condition, within 14 days
  • Our full delivery and returns details can be viewed in the footer
Explore
0 item(s), £0.00

0 items