Oxford-Mini-140 Stowaway-140 battery stand-aid hoist

Replacement battery pack for Oxford-Mini-140, and Oxford-Stowaway-140 professional hoists, two batteries 24v at low price

There are two batteries in this pack for the Oxford-Mini-140 and Oxford-Stowaway-140 classic hoists. It is necessary to maintain the battery and replace it as needed because a patient stand aid or hoist is crucial to the user and gives them the ability to move more freely. This pair of batteries will fit in your battery pack and give your device new life.

• Oxford Mini 140 battery
• Oxford Stowaway 140 battery

This suitable replacement battery is a valve-regulated sealed lead acid battery (VRLA) that employs absorbed glass mat technology (AGM). This particular battery is recommended for this installation since it won't leak when placed on its side, making it suitable for usage in residences, medical facilities, or senior living facilities.

Installation advice
Fitting the batteries is not a difficult task. If you look at your battery box, you will see six screws holding the case together; just undo these, and the box will open. Inside there are two batteries, with just two cables on each. Replace one at a time, and you can not go wrong. Then put the case back together, the whole task should take no more than five or ten minutes and save you a small fortune.
Assuming that you are fitting the batteries straight away, charge them. The very best way of treating them is to charge after every use, the longer you leave them in a partially discharged state the shorter the life expectancy will be. If they are not being used then recharge every six weeks to keep the cells in good order, though its probaly not a good idea to leave them on the charger any longer than neccessary.

Voltage: 12v x2 = 24v
Capacity: 2.9ah