Eaton 5125-1500i 1500VA 1050w replacement UPS battery set AGM
Replacement Eaton 5125-1500i 1500VA 1050w UPS battery pack, rechargeable sealed lead acid, safe non-spillable valve regulated VRLA batteries with advanced AGM technology at low competitive cost
Eaton was founded in America with a worldwide distribution network including Europe below you will find details of the battery you need for your Eaton 5125-1500i 1500VA 1050w, the energy that is required for functioning is stored directly onboard it takes the mains supply and passes it through the batteries and is powered by 12v cells, and comes with 4 x 12-volt batteries and that is what this offer is for which of course are rechargeable, sealed not-spillable safe AGM and VRLA offering a long life as these business machines will take a lot of work over the years
- Eaton 5125-1500i battery replacement
Fitting the batteries is quite an easy task to do yourself, you can refer to your manual for the procedure, once you have fitted them the system will want to fully charge the batteries, even though they will come out to you almost charged it will still want to complete the task, so there will be a period of time where you do not have the full protection that it can offer until it has completed this operation, if you can its best to do this initial charge without any load, we know this may not be convenient in a lot of installations but that is best advise
Batteries in this kind of installation will have a life span of between 2 to five years, this can vary greatly on conditions, good ventilation, if it's in a office do not use it as a book shelf, keeping the load low will extend the life span, in a ideal world below 40%, they are so often run to the edge of their capabilities, while they may be able to do it its reducing the life span
The cells are absorbed glass mat or AGM, they are also valve regulated sealed lead acid or VRLA, this is the recommended type of battery for this installation, they will not leak if mounted on the side so safe to be used in tower or rack mountable configuration with fear of spillage in mission critical applications as well as the home office
Check the code on your UPS to ensure you are ordering the correct battery set, the size of the batteries are also specified below if you are unsure, many of the codes on UPS systems are similar
Voltage = 12-volts
Capacity = 7Ah @20Hr
Chemistry = AGM, VRLA
Hot swap capable
This offer is for a total of 4 lead acid batteries for the Eaton 5125-1500i 1500VA 1050w the overall size of the batteries are
Length = 151mm
Width = 65mm
Height = 94mm
Battery layout - from chart below = 5
As an easy upgrade path we are able to offer this battery size as a 9ah version, it will slip straight into the same cavity but offer you a longer runtime, the link to this will be a little bit further below
