Powerware 5115 500 VA UPS battery replacement.
Replacement Powerware 5115 500 VA battery, easy to fit recommended sealed lead battery for your uninterrupted power supply.
The fitting instruction for changing the battery in your Powerware 5115 500 VA surge protected unit can be found in your manual. It is quite easy, first power down any devices behind it and then remove the power lead from the mains, the front cover will pull off with a forward motion exposing the battery door behind it, removing this will show the battery, slide it out and replace, it will take you no more than five minutes ones you have done it once before.
We would advise that you allow the UPS to fully charge your new battery before putting any load through it, this resets it much better, the battery will come to you almost fully charged anyway and it is well worth the wait doing this, perhaps change at the end of the day to avoid downtime.
- Powerware 5115 500 VA UPS battery replacement
Non-spillable - can be mounted on its side ( it is in the installation ).
Not hazardous - suitable for home and office.
recyclable.
Chemistry of battery: sealed lead acid, VRLA, AGM
Voltage of battery: 12-volt
Capacity of battery: 7Ah
The Powerware 5115 500 VA UPS battery replacement has the following size
151mm long
65mm wide
94mm High