Rhino SLA1.2-12 12v battery replacement sealed AGM VRLA.
Replacement Rhino SLA1.2-12 non-spillable sealed lead acid valve regulated 12v 1.2ah compatible batteries, seen in alarm systems, emergency lighting, portable devices, AGM and VRLA, offered direct from the warehouse at a low cost.
Here you will find we have compiled detailed information to help you make an informed decision on the purchase of a new replacement compatible battery for your Rhino SLA1.2-12, the 12v cells have an energy storage capacity of 1.2ah. They are also capable of deep cycling, often seen in portable medical equipment or backup in alarm systems. They are rechargeable, non-spillable, and non-hazardous, so they're safe to handle and use indoors. They have an AGM and VRLA type of cell. More information on the chemistry is available below.
The batteries you receive from us will be almost fully charged. However, you should still charge them before first use, the only time you do not need to do this is if it's going into something with its own always connected power supply, for example a alarm system, as this will do the job of charging for you, there should be no need for many hours, it will probably not take very long at all, just until your charger indicates they are ready, this will of course depend on the charger capabilities, you may well just want to fit them and use the equipment, but do not miss this first step if needed, it's worth waiting until the first charge has completed. It may well contribute to over life span.
Unless you are a very extended user you will probably not even notice that it can take a number of charge and use in your equipment before a full capacity charge is achieved, this is all part of the conditioning process and quite normal, if being used in a portable device then ensure that after every use that you put the batteries back on charge, letting them sit in a partially discharged state is not wise, you should never deliberately go out of your way to try fully discharge the batteries, we are often asked will this extend the life but no this will only reduce its life span and cost you money in the long run, if it turns out there are periods where the equipment is not being used regularly then ensure the batteries are fully charged before any period of downtime and then topped up every four weeks but do not leave on the charger for more than 24-hours.
The Rhino SLA1.2-12 replacement battery type we are offering here is VRLA and AGM. They need no maintenance, no topping up of fluids; they are sealed lead-acid and valve-regulated with AGM technology. They are non-hazardous and safe to use around the home or in portable devices, as well as travelling.
We offer the information on this page purely as a guide only, if you carefully check the code then you should be ok, many are very similar. Hence, it's worth being vigilant, if in doubt look at your old battery, take note of the dimensions and anything written on the side of them, we have included the size below so you can double check, This 12-volt 1.2ah product is recyclable it is made mainly of lead which is easily transformed, please ensure they are disposed of properly at a recycling centre once they have completely fulfilled their useful purpose for you, more information about recycling can be found at the foot of this page.
Voltage = 12v
Capacity = 1.2Ah @20Hr
Chemistry = Pb, sealed lead acid, VRLA, AGM.
Rechargeable lead acid batteries for the Rhino SLA1.2-12, the physical size of the individual batteries is as follows:
Length = 97mm or 3.81-inches
Width = 43mm 1.69-inches
Height = 52mm or 2.04-inches.
