Yuasa NP2.9-12 battery 12v sealed non spill 3.2ah AGM batteries.
Replacement Yuasa NP2.9-12 non-spillable 12-volt sealed lead 3.2-amp hour batteries, AGM and VRLA can be mounted on its side offered direct from warehouse at low cost.
You will note we also do a battery with same model that is a different shape, this one is the shorter one often seem in alarm systems, look at the shape or use the measurements to ensure you are ordering the correct one for your use.
On this website page are listed the specifications and other relevant information relating to a replacement battery pack for the Yuasa NP2.9-12 which are 12v 3.2ah sealed lead acid as such they are non-spillable AGM & VRLA cells can be used in portable devices, they are capable of deep cycling.
AGM batteries do not need any maintenance, they are sealed, valve regulated or VRLA and safe to position on the side, they will not leak, they can be used indoors safely and not hazardous.
The details of this compatible battery pack are offered as a guide, you should check the codes on your old battery before ordering a replacement.
Voltage = 12-volts
Capacity = 3.2Ah @ 20Hr
Chemistry = AGM, VRLA.
Replacement Yuasa NP2.9-12 the overall size of each battery is
Length = 134mm or 5.27-inches
Width = 67mm or 2.63-inches
Height = 61mm or 2.4-inches
Flat blade push on spade terminal 3/16 inch or 4.75mm wide.
Your new 12-volt battery will come out to you pretty much fully charged, but unless it's going in something with its own built in always on mains connected charging circuit, like for example a alarms system then you should still charge when you receive it and before first use, and for that matter after every use, do not try to discharge it, and if not being used charge every 4-weeks, by not keeping your new battery fully charged you are risking a shorter life which will cost you money in the long run.
