Powertron PE6V12RF1 battery replacement 6-volt 1.2ah sealed AGM
Replacement Powertron PE6V12RF1 non-spillable sealed lead acid valve regulated 6-volt 1.2ah batteries, AGM and VRLA, offered direct from warehouse at low cost
Here you will find we have compiled detailed information to help you make a informed decision on the purchase of new replacement compatible battery for your Powertron PE6V12RF1, they can store 1.2-amp hours of energy in the 6-volt cells and capable of deep cycling, they are as would be needed rechargeable and not-hazardous and will not spill so therefore safe to be handled and to use indoors or in portable equipment, AGM and VRLA cells, more information about these chemistries will be found below
- Powertron PE6V12RF1 battery replacement
The batteries will be delivered with a very good charge in them, but even so you should still charge before using for the first time, however if it's a battery backup for something that's always connected to the mains like a monitor or maybe a alarm system then you do not need to charge it first as the system will do that for you, the period of this initial charge before use need only be until the charger states they are ready, probably not very long at all, you may well be impatient and use the equipment without charging but it's worth waiting until its fully charged and will help extend overall life expectancy
Most users will not even notice but it will take a number of charges and associated use in your equipment before they are capable of accepting a full capacity charge, this is quite normal and part of the conditioning process, allowing your new batteries to sit without charge is not a good idea if using them in a portable device, as soon as you have finished using it put it back on charge, you cannot rejuvenate this kind of battery by running them down, going out of your way to fully discharge the batteries will reduce their life span, so do not do it, if for any reason you are not using them for long periods then you should recharge every 4 to 6-weeks but do not leave on the charger for more than 24-hours at a time
These 6-volt batteries are AGM ( absorbed glass mat ) and VRLA ( valve regulated lead acid ) they are deep cycle and not-hazardous so suitable for use indoors or in portable devices, they will not leak all features that make them useful for use in this kind of application, they of course do not require any maintenance
The information we have provided on this page is a guide, you should carefully check before ordering as many are very similar, if still in doubt you can look at your old battery, take a note of the dimensions and anything that may be written on the side of them, this will always be the best way, we have also included the physical dimensions on this page so you can confirm, as these 6-volt 1.2ah batteries are made of lead they are recyclable and environmentally friendly, more information about recycling can be found on a link at the foot of this page
Voltage = 6-volts
Capacity = 1.2Ah @20Hr
Chemistry = VRLA, AGM, sealed lead, Pb
There are 1 rechargeable batteries for the Powertron PE6V12RF1 the physical size of the individual batteries are as follows
Length = 97mm or 3.81-inches
Width = 24mm 0.94-inches
Height = 51.5mm or 2.02-inches
Battery layout - from chart below = 1
