Miller & Mason G7000W-E battery petrol generator 12v.
Replacement Miller & Mason G7000W-E compatible battery, correct flag terminals for 7HP electric start petrol generator.
The Miller & Mason G7000W-E is powered by an 8HP four-stroke over-head valve single-cylinder air-cooled engine; it has an eleven-litre fuel tank to keep it running for around ten hours with an output of 3000w, which can be made available via a pair of UK SC plug sockets plus the addition of a 12v DC connection. It has an easy pull start mechanism and, of course, an electric start.
- Miller & Mason G7000W-E battery
Our battery will replace the original supplied. It is 7ah and has the required upright nut and bolt terminals. We can also offer a 9ah version, which is the same physical size but offers up to 28% more energy to ease starting, which may be more than welcome on a cold morning. To obtain the 9ah then, select from the easy upgrade drop-down menu under the available options above.
Looking after your new Miller & Mason G7000W-E battery will save you money in the long run. Charge when it arrives and first use; if not used for long periods, recharge every four to six weeks. It will take several uses in the generator before the battery is conditioned enough to accept a full-capacity charge; this is quite normal. Remember that it will probably take thirty minutes to replenish the energy lost when you start the engine.
This is the correct battery size and terminals for the Miller & Mason G7000W-E generator; contact us directly if you have another device.
Battery Type: VRLA, AGM, sealed lead.
Voltage: 12v
Capacity – 7ah
Terminals – M5 nut and bolt, upright flag type. See the battery picture above.
