Eaton EB027SP, EB029SP and EB033SP UPS battery replacement.
High-quality full replacement for Eaton EB027SP, EB029SP, and EB033SP battery packs, installed in UPS machines at low cost and with quick delivery.
If the beeps start sooner than they used to, the self-test flags a fault, or the backup time has noticeably shrunk, it’s usually a sign the internal cells are simply worn out. As these models share the same three-battery layout, this page provides the replacement set for the Eaton EB027SP, EB029SP, and the EB033SP.
- Eaton EB027SP UPS battery replacement
- Eaton EB029SP UPS battery replacement
- Eaton EB033SP UPS battery replacement
AGM VRLA design locks the electrolyte in place, creating a sealed, maintenance-free battery that’s ideal for the constant float charge a UPS uses. As a rechargeable battery format, it’s happiest being kept topped up and ready, prioritising steady dependability over gimmicks.
To help it last, site the UPS somewhere cool with decent airflow, try not to run it flat repeatedly, and avoid leaving it switched off for long stretches. Once installed, give the pack a full initial charge before expecting peak runtime, and let the UPS perform the occasional self-test so problems show up early rather than during an outage.
Battery chemistry: VRLA, AGM, Pb, and sealed lead.
The battery voltage: 12 V.
The capacity of the battery: 9 Ah @ 20-hr (amp-hours).
There are a total of two batteries in this set for the Eaton EB027SP, EB029SP and EB033SP. The size of each is as follows:
Length = 151mm
Width = 65mm
Height = 94mm.
Ask about batteries
