Eaton Powerware 9125 3000 replacement UPS battery set AGM
Replacement Eaton Powerware 9125 3000 batteries, rechargeable valve-regulated UPS AGM battery set at a low competitive price.
Please find the following details are for a set of batteries for the Eaton Powerware 9125 3000, the onboard energy storage facility also filters the mains input supply before releasing on to your valuable equipment behind it and is powered by way of 12v cells, and comes with six batteries and that is what this offer is for which are rechargeable they are the recommended non-spillable safe AGM and VRLA type of cell which would be required in this kind of machine.
- Eaton Powerware 9125 3000 battery
We will send you Eaton Powerware 9125 3000 batteries that are almost fully charged, your UPS will finish off the charge which helps it reset to the battery cell itself, with this in mind it will mean that there is a period of time that the system is unable to offer full runtime protection while it is doing this, if you can its best to do this initial charge without any load, we know this may not be convenient in a lot of installations but that is best advise.
You would expect these Eaton Powerware 9125 3000 batteries to last between two to five years in this kind of device, this can vary greatly on conditions, using the system as part of the office furniture is not the best idea, it needs ventilation, the batteries will get very hot as they are working hard 24-hours a day, the more heat the shorter their life, keeping the load low will extend the life span, in a ideal world below 40%, they are so often run to the edge of their capabilities, while they may be able to do it its reducing the life span
Check the code on your system carefully to ensure you order the correct Eaton Powerware 9125 3000 battery set. The batteries are made mainly from lead and are recyclable; more information on recycling can be found at the bottom of this page.
Voltage = 12v
Capacity = 7Ah @20Hr
Chemistry = AGM, VRLA
Hot swap capable.
This set contains 6 rechargeable batteries as used in the Eaton Powerware 9125 3000. The physical size of each is as follows:
Length = 151mm
Width = 65mm
Height = 94mm.
If you want to get the most from your UPS why not upgrade the battery to a 9ah version, it has the same dimensions and can replace the 7ah original without issue with the benefit of a longer runtime. Selectable from the easy upgrade section above.
