Eaton Powerware PW5115-500-RM UPS battery replacement

Eaton Powerware PW5115-500-RM UPS battery replacement pack.
Replacement Eaton Powerware PW5115-500-RM sealed lead-acid battery pack for a rechargeable UPS system; valve-regulated lead-acid (VRLA) and AGM batteries; they will not spill; safe to be mounted on the side at a low, competitive cost.

You are probably visiting this page because your Eaton UPS is beeping away with a not-so-pleasant tone, indicating it needs new batteries. This is not something to be wary of, but it's not a good idea to delay, as it protects the valuable data behind it. It's not a difficult job, and it will need to be done every few years unless you have money to throw away and buy a new unit each time. Below you will find details of the battery for your rack-mountable Eaton Powerware PW5115-500-RM. The onboard energy storage facility also filters the mains input before supplying it to your valuable equipment behind it, and is powered by 6v cells. Comes with two 6v batteries, and that is what this offer is for, which, of course, are rechargeable. They are safe, non-spillable AGM and VRLA-type batteries; more information about their chemical makeup is available below.

• Eaton Powerware PW5115 500 RM battery

Even though the batteries we send to you will almost be fully charged the UPS will still need to complete a full charge, with this in mind it will mean that there is a period of time that the system is unable to offer full runtime protection while it is doing this. While it may not be convenient, it is best to run without a load at startup so it can fully reset to the new energy level.

Batteries in this kind of installation will have a lifespan of between 2 and 5 years. This will depend heavily on use, storage, and good ventilation. If it's in an office, do not use it as a bookshelf. Keeping the load low will extend the lifespan. In an ideal world, below 40%, they are so often run to the edge of their capabilities; while they may be able to do it, it's reducing the lifespan.

The cells are absorbed glass mat (AGM); they are also valve-regulated sealed lead-acid (VRLA. This is the recommended type of battery for this installation; they will not leak if mounted on the side, so they are safe to use in tower- or rack-mountable configurations, with no risk of spillage, in mission-critical applications as well as the home office.

Please note that the information on this page is only a guide, we have tried to assist you in getting the correct batteries for your UPS system, if you are not sure you can always check what you have before ordering. This will also give you the opportunity to see how easy it will be to change the batteries. If you look closely at the product code on your UPS, then you shouldn't go wrong.

Voltage = 6v
Capacity = 7Ah @20Hr
Chemistry = AGM, VRLA
Hot-swap capable.

We are offering 2 quality batteries for the Eaton Powerware PW5115-500-RM. The physical size of the individual batteries is as follows:
Length = 151mm
Width = 34mm
Height = 94mm.

Hot-swap capable; no maintenance required.