PowerWalker VI 650SE LCD/IEC, 10120091 battery replacement
Replacement PowerWalker VI 650SE LCD/IEC, 10120091 UPS battery pack, rechargeable batteries for the PowerWalker computer battery backup uninterrupted power supply, no maintenance required.
The following information are details to be used for replacement batteries for the Powerwalker VI 650SE LCD/IEC VI 650SE LCD/IEC, the onboard energy storage facility is powered by way of 12-volt and comes with 2 off, 12-volt batteries, as you would expect they are rechargeable and as they are also recyclable to give them a long life and of course environmentally friendly, more information on recycling can be found on our recycle page
- Powerwalker VI 650SE LCD/IEC battery replacement
These batteries are valve regulated, the recommended fitment for this type of equipment, they also benefit from having advanced absorbed glass mat construction or AGM, this means they will not spill and can be mounted on their side, so can be used in tower of rack mount configurations, the expected life span of batteries in UPS systems is between 2-5 years, this can vary greatly though if you are asking too much of it, try to keep the output below 50% of the capacity of the UPS, less would be better, the other thing that can reduce life is poor ventilation around the unit, the batteries will get very hot in the normal course of use.
Please note that the information on this page is only a guide, we have tried to assist you in getting the correct batteries for your UPS system, if you are not sure you can always check what you have before ordering, this will also give you the opportunity to see how easy it is going to be to change the batteries, if you look closely at the product code on your PowerWalker UPS then you shouldn't go wrong. The batteries will come out to you almost fully charged but there will still be a short period of time where the UPS will not have a full possible capacity while it is doing its first charge, so note that you will not have a full battery runtime ability until it has completed this, the batteries need no maintenance and hot swap capable.
Voltage = 12-volts
Capacity = 7Ah @20Hr
Chemistry = AGM, VRLA
This set contains a total of 2 quality batteries for the Powerwalker VI 650SE LCD/IEC VI 650SE LCD/IEC the dimensions of the individual battery pack are as follows
Length = 151mm
Width = 65mm
Height = 94mm
If you prefer we can offer this battery in a 9Ah format, it's the same dimensions and will slip straight in, a very easy upgrade that will offer you more runtime, the link to it will be just a little bit further down the page
