APC Smart-UPS SMT750RMI2U SMT750RMI2UNC battery replacement
Replacement APC Smart-UPS SMT750RMI2U, SMT750RMI2UNC and SMT750RM2U battery pack, pair of easy self replace AGM sealed batteries at low cost
During power surges and failures, Uninterruptible Power Supply (UPS) devices keep computer systems and IT equipment safe and operational. When the flow of electricity drops to an insufficient voltage or stops, an Uninterruptible Power Supply (UPS) provides battery backup power. An uninterruptible power supply is critical in a mission-critical environment. Backup power is provided for a specific period, depending on the size and technology of the UPS unit, until generators can be activated or network components can be properly shut down. When electricity flows freely, computers and accessories are safe from harm. A UPS unit can effectively protect a single device or an entire data centre.
The first thing to check is that you looking at the correct set for your UPS, there is more than one APC Smart-UPS 750 model. On the reverse of the unit you will find a plate with the model number on it, it should say SMT750RMI2U or SMT750RMI2UNC, if it does you are on the right page, if not put what is there into our search box above and it will guide you to the correct page.
- APC Smart-UPS SMT750RMI2U battery
- APC Smart-UPS SMT750RM2U battery
- APC Smart-UPS SMT750RM12U battery
- APC Smart-UPS SMT750RM12UNC battery
This offer contains a pair of batteries as would be required for the above installation.
How to extend the life of your SMT750RMI2U batteries?
The batteries on offer are maintenance-free, sealed lead-acid with suspended electrolyte, leakproof, non-hazardous, and can be installed on their side, making them ideal for use in these systems. While many large institutions may change the batteries every one or two years, you should expect them to last between two and five years, but there are simple ways to help them last longer. The UPS has its own charging cycle, which is a good place to start, but you should run the system without load immediately after installation to help them reset. Other tips for extending battery life include keeping the system clean, having good ventilation around the system, storing it in a climate-controlled room, and using less than 40% load when possible.
SMT750RM12UNC battery installation
Installing the batteries is a relatively simple procedure; if you have any questions, consult your owner's manual. Most people can do it, but if you are unsure, please seek professional advice. Because the battery module is hot-swappable, there is no need to turn it off. To begin, remove the machine's back cover and unplug the battery module. Undo the screws and slide out the module, replace the batteries inside, and slide the module back in, making sure the screws are back in place and the cover is replaced; if you think you might forget how to put it back together, take a photo of it first.
Voltage: 12v per battery (two in set)
Capacity: 7Ah @ 20Hr
Chemistry: VRLA, Pb, sealed lead, AGM
Terminals: T2 Spade - 6.35mm
There are two batteries in this set for this Smart-UPS SMT750RMI2U or SMT750RMI2UNC, dimensions of each are as follows:
Length - 151mm
Width - 65mm
Height - 94mm
