Oneac 1BP204 battery replacement 12v 4.5ah sealed
Replacement Oneac 1BP204 battery set, valve-regulated, safe, non-spillable 12V 4.5Ah rechargeable batteries at a low price.
Here you will find we have offered on the page the relevant information to help you consider the decision of purchasing a new compatible replacement battery for your Oneac 1BP204, which are 12v and 4.5ah these are seen in quite a few applications from portable equipment and uninterruptible power systems as power backup and or course capable of deep cycling, rechargeable and recyclable, the main content of the structure is Lead Pb, this in turn means they are very environmentally friendly as can very easily be made into something else, maybe another battery at the end of their working life and the time comes for recycling, more information on this can be found on our recycling page.
- Oneac 1BP204 battery replacement
When you receive your order of Oneac 1BP204 batteries from us they will have a fairly high charge in them, but you still need to fully charge them before first use, the only time you do not need to do this is if it's going into something with its own always connected power supply, for example a UPS system, as this will do the job of charging for you, your charger will indicate to you when it has completed the charge, it will probably not take very long depending on the charger, the light will generally change when its ready, do not just use without this initial charge, it will help to extend the battery life overall.
You probably will not even notice it but it can take up to ten charges and use in your equipment before you are able to receive and hold a full capacity charge in your Oneac 1BP204 batteries, this is all quite a normal part of the conditioning process, as soon as you after each use put them back on charge, do not allow them to sit in a discharged state, we have heard of people trying to extend battery life by running them down, it will not work with this type of battery, it will only shorten the life, if it turns out there are periods where the equipment is not being used on a regular basis then ensure the batteries are fully charged before any period of downtime and then topped up every four weeks but do not leave on the charger for more than 24-hours.
These batteries will require no general maintenance or topping up with fluid, as they have none; they are 12-volt AGM and VRLA, of course, with deep-cycle properties required for this type of application. They are also non-hazardous, so safe to use in the home or in portable devices.
We have provided the information here only as a guide, you need to check the code carefully as so many of them are pretty similar so it's easy to make a mistake, you will also find we have listed the relevant dimensions so you can make sure you are ordering the correct one, looking at your old Oneac 1BP204 power pack and taking note of the dimensions and anything that may be printed on the side is probably the wisest thing to do, This 12v 4.5ah product is recyclable, it is manufactured mainly of lead or Pb which is easily transformed, please ensure they are disposed of properly at a recycling centre once they have completely fulfilled their useful purpose for you, more information about recycling can be found at the foot of this page.
Voltage = 12v
Capacity = 4.5Ah @20Hr
Chemistry = sealed lead, AGM, VRLA
The physical dimensions of the Oneac 1BP204 replacement are as follows
Length = 90mm or 3.54-inches
Width = 70mm 2.75-inches
Height = 101mm or 3.97-inches.
We can also offer this Oneac 1BP204 battery size as an extended 5ah, it will directly replace this one, meaning more energy per charge, it's the same physical size, see the easy upgrade above.
