APC SRT72BP SRT72RMBP replacement battery module SRT2 UPS.
Replacement AGM sealed lead battery pack for APC SRT72BP and SRT72RMBP to fit SRT2 range of UPS, easy to replace twelve 12v 5ah batteries at low prices.
This offer is for a set of twelve individual batteries that can be used to replace the older ones on your SRT72BP or SRT72RMBP extended battery module pack using all our old cables and connections. It is important to replace your batteries when it tells you to as you have a UPS installed for a reason, to protect your valuable data from power surges, spikes and other electrical problems. If you have an external battery pack fitted to your UPS it greatly increases the length of time that it is able to provide you power for when the power inevitably goes down.
These batteries are environmentally friendly, sealed lead-acid, non-hazardous and absorbed glass mat or AGM for short. This means they are safe to be used or stored on their side as there is nothing to leak, ideal for machines such as a an uninterruptable power supply. They are also recyclable as they are predominantly made of lead so at the end of their useable life (which should be, depending on usage, two to five years) please direct them to a local recycling centre so they can be made into another useful product.
- APC SRT72BP battery
- APC SRT72RMBP battery
This is a full set of twelve batteries, they are hot swap capable.
How to ensure you get the maximum life from your SRT72BP batteries
Batteries installed into UPS machines have a good start in their useable life as the maintaining of voltage of them is controlled by a computer and not a human. There are things that you can do to help however. The first thing you should do is run the system without any load as this will help the batteries reset to their new home. Other things you can do to help is making sure the room where it is stored is climate controlled and has at least decent ventilation. Also try to not to use less than 40% load where possible.
Battery installation tips for APC SRT72RMBP
You would know the batteries need replacing as the UPS will either make a noise informing you or a light will appear on the front of the machine, no not delay in replacing them. Installation of these extended runtime battery packs and are fairly straightforward but if need be please seek advice from an engineer. The Downloads section has a guide from APC to help you if needed.
Voltage and Capacity: 12v each, combined together to create 72v and 5Ah.
The physical size of each battery in this pack of twelve for the SRT72BP and SRT72RMBP is as follows:
Length: 90mm
Width: 70mm
Height: 101mm
