Eaton Powerware 5115-1400 battery set UPS 9Ah rechargeable

Eaton Powerware 5115 1400 battery set UPS 9Ah
Replacement Eaton Powerware 5115 1400 & 1400i battery set, three larger sized 9-amp hour sealed safe batteries for this line-interactive UPS system

The Eaton Powerware 5115-1400 is a 950 watt 1400VA Line-interactive UPS system in a tower configuration, normally marked as a 1400i which has 220 to 240v input where as the 1400 has 120v input, both take the same batteries, the UPS may also have the part numbers of 05146566-5591 or 05146567-5591

• Powerware 5115 1400 battery

Changing the batteries is quite easy, you should ensure the UPS is off and unplugged, although the batteries are hot swap capable, on the front on the left pull the front cover forward and it will come away, behind this you will see the metal battery cover, which slides upward, undo the connector and slide the batteries out, replace in reverse order. We would recommend that you power the system up without load to start, this gives the batteries the best chance to reset properly to the new energy level

Chemistry of battery = VRLA sealed lead, AGM
Voltage = 12-volt
Capacity = 9AH
There are 3 batteries in this set for the Powerware 5115 1400, the physical size of them are
Length - 151mm
Width - 65mm
Height - 94mm