Eaton EB005SP EB031SP battery replacement.
Full set of eight compatible battery replacement units for the Eaton EB005SP and EB031SP UPS, compatible battery replacement set for reliable backup runtime.
If your UPS has started beeping more often, showing reduced runtime, or struggling to hold load during a test, it’s usually the internal cells telling you they’ve had their day. On offer here is a full set of eight 12V individual batteries to suit the EB005SP and EB031SP battery packs.
These are compatible battery replacements and they’re fully rechargeable battery, intended for standby use inside a UPS where steady float charging is the norm. Swapping the whole set at once helps keep charging behaviour even across the pack and avoids the weak-link effect you get when only one or two are changed.
- Eaton EB005SP UPS battery replacement
- Eaton EB031SP UPS battery replacement
Being sealed lead acid (VRLA/AGM), these batteries are maintenance-free and designed to handle frequent float charge without needing top-ups. They’re spill resistant and suited to enclosed UPS bays with limited access.
To get the best service life, keep the UPS in a cool, ventilated spot and don’t leave it sat fully discharged after an outage. A periodic self-test is helpful, but constant deep discharges aren’t—aim for sensible load levels so heat and stress stay down, and your new set keeps its runtime for longer.
Chemistry of battery: VRLA, AGM, Pb, and sealed lead.
The voltage of the battery: 12v.
The capacity of the battery: 8.8Ah @20-hr, amp-hour.
There are a total of eight batteries in this set for the Eaton EB005SP and EB031SP
The size of each is as follows:
Length = 151mm
Width = 65mm
Height = 94mm.
