Firstpower FP672 6v 7ah battery replacement AGM VRLA
Replacement Firstpower FP672 non-spillable compatible sealed lead-acid valve-regulated 6v 7ah batteries, AGM and VRLA.

Here you will find we have compiled detailed information to help you make a informed decision on the purchase of new batteries for your Firstpower FP672 compatible deep cycle battery pack which is 7ah and 6v, recyclable, with deep cycle capabilities, the main component by far in the cells is lead this means they are a environmentally friendly as can very easily be made into something else, maybe another battery at the end of their life and the time comes for recycling, more information on this can be found on our recycling page.

• Firstpower FP672 battery replacement

When your order is delivered to you your new Firstpower FP672 batteries will be almost fully charged, but regardless of this you still need to complete a full charge them before first use, this would not be the case if it's going in something with its own power supply, for example an alarm system as this will do the job for you, the period of this initial charge before use need only be until the charger states they are ready, it probably will not take long, make sure you do not miss the initial charge, doing so may reduce overall life expectancy.

While is not something that most will even notice but it will take a number of charges and corresponding use in the device before a full capacity charge is reached, this is a normal part of the conditioning process, each time you have used your new battery then you should put it back on charge as soon as you can, do not leave it sitting in a semi discharged state for any longer than necessary, going out of your way to fully discharge the batteries will reduce their life span, so do not do it, these batteries need to be kept charged. So if there is any reason where they are not being used, then ensure they are charged beforehand and then every 4 weeks, but do not leave them on a charger for more than 24 hours.

These 6V replacement Firstpower FP672 batteries are AGM (absorbed glass mat) and VRLA (valve-regulated lead-acid). They are deep-cycle and non-hazardous, making them suitable for use indoors. They will not leak. All features that make them useful for use in this kind of application are that they do not require any maintenance.

The information we have provided on this page is only a guide; you should carefully check all of the details of your device before ordering, as many are very similar. If still in doubt, you can look at your old Firstpower FP672 batteries. Take note of the dimensions and anything that may be written on the side of them. This will always be the best way. We have also included the physical dimensions on this page so you can confirm that these batteries are primarily made of lead and can be easily recycled. More information on recycling can be found at the bottom of this page.

Voltage = 6v
Capacity = 7Ah @20Hr
Chemistry = VRLA, AGM, sealed lead, Pb.

This set contains one rechargeable battery, as used in the Firstpower FP672. The physical size of the individual batteries is as follows:
Length = 151mm or 5.94-inches
Width = 34mm 1.33-inches
Height = 94mm or 3.7-inches.