Lumag MD500E PRO barrow battery replacement 12v.
Replacement compatible Lumag MD500E PRO, MD500Ek & MD500EPROh battery, 12v electric barrow with tip, sealed AGM batteries at low price.
- Lumag MD500E PRO barrow battery
- Lumag MD500E battery
- Lumag MD500EK battery
- Lumag MD500EPROh battery
There are four batteries in this set, and they combine to produce a 48v output.
The Lumag MD500E & PRO is a powered wheelbarrow with a pneumatic tip function. It can carry up to 500kG, and as it's electrically powered and has no engine, it can be used indoors and outside. It has LED lighting to help with poor lighting conditions. The Lumag MD500E & PRO barrow is driven by a 48v motor set-up, and this is powered by four 12v batteries that combine to produce 48v, which is what this offer is for replacement batteries.
Keeping your new Lumag MD500E PRO barrow batteries functioning at their best is important; charge them when they arrive and are first used. Charge after every use, and do not allow them to sit in a discharged state for any longer than absolutely necessary. If not being used for long periods, then also recharge every six weeks.
It will take up to fifteen charges and use in the equipment before the cells can accept a full capacity charge. This is quite normal and part of the conditioning process that all rechargeable batteries endure at the start of their busy working lives.
This sealed lead Lumag MD500E PRO battery replacement set will need no maintenance or fluid topping; it is sealed valve regulated. However, charging the battery is essential. We have covered all of this above, so make sure you have read it carefully.
Voltage: 12v (four batteries combine to make 48v)
Capacity: 38ah @20Hr (to 1.85V/Cell), 32ah @3Hr (to 1.75V/Cell).
Chemistry: AGM, VRLA, Pb, sealed lead acid.
Terminal: screw-down, M5.
Lumag MD500E PRO battery replacement set.
