A13.2S, A212, Flo gard 6300 infusion pump battery 3.2ah sealed 12v.
Replacement A13.2S, A212, Flo gard 6300 infusion pump 12-volt battery pack, rechargeable sealed lead acid non-spillable valve regulated VRLA 3.2-amp hour batteries with AGM technology at low competitive cost.

Below you will find we have listed more detailed information so you can make a educated decision on the purchase of a new replacement battery pack for the A13.2S, A212, Flo gard 6300 infusion pump which are 12v 3.2ah sealed lead acid and of course rechargeable, these sealed AGM and VRLA cells will not leak and suitable for use in portable devices is required.

• A13.2S, A212, Flo gard 6300 infusion pump battery

AGM batteries are very handy for portable devices, they will not leak, not-hazardous so can be used inside, they can be safely mounted on the side, they do not need topping up with fluid, they need no maintenance, they are valve regulated or VRLA.

All the information and specifications her listed for this compatible battery will be no good if you order the wrong one, it's here as a guide only, check what you already have fitted, it will not take long after all you will want to know how its fitted and can save you days if you order the wrong one.

Voltage = 12-volts
Capacity = 3.2Ah @ 20Hr
Chemistry = AGM, VRLA.

This set contains a total of one rechargeable lead acid batteries for the A13.2S, A212, Flo gard 6300 infusion pump the overall size of each battery is
Length = 134mm or 5.27-inches
Width = 67mm or 2.63-inches
Height = 61mm or 2.4-inches
Standard F1 terminal - 4.75mm

Fully charge your new sealed lead 12-volt battery pack when the parcel turns up from us and before first use, charge after each and every use, do not try to purposely discharge it and if not using for long periods charge every 4-weeks, by keeping your new battery charged it will help your pocket as it will last longer.