MK MU-1 SLD M FT-2 battery AGM mobility scooter power-chair.
Pack of two 12v 35ah MU-1 SLD M FT-2 MK branded AGM battery for mobility scooters and power-chair replacement batteries at a low price.
- MK MU-1 SLD M FT-2 battery
On offer here is a pack of two valve-regulated, non-spillable, non-hazardous, sealed lead-acid AGM batteries, manufactured by MK Powered. These features make the battery very robust and allow it to be mounted on its side if necessary, which also makes it safe for public transportation and air travel. However, you should notify them when you book your flight.
Will directly replace any of the following batteries, but if you are unsure, you should check the specifications on this page to ensure it will fit 12v 31ah 32ah 33ah 34ah & 35ah.
Checking your manual for detailed instructions on how to install your batteries is recommended, but it is not very complicated and should only require some patience and a screwdriver. This varies depending on the type of mobility device you have. Still, most often, you will need to remove the battery casing (commonly under the seat) from the scooter and open it up with a screwdriver. Inside, you will see two batteries. Carefully remove the wires from them and replace them with your new batteries. Secure the box back up, put it back onto your scooter, and you are ready.
Taking good care of your battery is crucial if you want it to travel a long distance and have a long life. The first thing you should do is top up the batteries with charge when they are delivered, although this should not take very long, as our batteries are more or less fully charged already. The other important note is that you must charge them after every use and never leave them in a discharged state.
Voltage: 12v
Capacity: 35ah @20Hr
Chemistry: AGM, Lead
Terminals: M5 Bolt Down (F6) (This replaces the upright terminals, which are no longer made).
The physical size of the MK MU-1 SLD M FT-2 battery is as follows:
Length: 196mm 7.72-inches
Width: 130mm 5.12-inches
Height: 169mm 6.65-inches.
