6300 Flo gard infusion pump battery replacement non-spillable 3.2ah.
Replacement 6300 Flo gard infusion pump battery, 12-volt non-spillable sealed lead acid rechargeable batteries, they are safe to use indoors and portable devices, 3.2-amp hour at low prices direct from warehouse.
This web page is dedicated to supplying more information relating to a replacement battery pack for the 6300 Flo gard infusion pump which run at 12-volts and have a energy capacity of 3.2-amp hour, these are non-spillable VRLA and AGM, they can be used in portable devices without fear of spillage.
- 6300 Flo gard infusion pump battery
This is a AGM type of battery, this stands for absorbed glass mat, the normal liquid that you would associate with lead acid batteries is embedded and contained within a glass matting that lays between the plates in the cells in order to store electricity and to separate them. To the end user it means the battery is not-hazardous and can be mounted on its side or used in portable devices and it will not leak.
If you have already checked your old battery serial codes then do so, this is only a guide, collated data from available resources, the physical dimensions of this compatible one are listed here on the page.
Voltage = 12-volts
Capacity = 3.2Ah @ 20Hr
Chemistry = AGM, VRLA.
we are offering one lead acid batteries for the 6300 Flo gard infusion pump we have mentioned the size below of each battery for your convenience
Length = 134mm or 5.27-inches
Width = 67mm or 2.63-inches
Height = 61mm or 2.4-inches
Standard push fit flat spade terminals - 4.75mm or 0.187 inch.
Do not allow the battery to become fully discharged, charge when you receive it and if not being used every 4-weeks, charge after each and every use, save money by looking after your battery, keep it charged.
