Skip to Main Content

Alaris Medical 280 SpaceSaver Star Flow Pump replacement battery 6v

£26.98 inc. VAT

Images for assistance only.
Share This Product
  • Model:BT630-25988
  • Battery Charge:Rechargeable
  • Battery Voltage:6.00 Volts
  • Battery Capacity:3.00 Ah
  • Battery Chemistry:AGM
  • Condition:New
  • Pack Contains:1
  • Shipping Weight:0.65 Kilos

Alaris Medical 280 SpaceSaver Star Flow Pump replacement 6-volt battery
Replacement Alaris Medical 280 SpaceSaver Star Flow Pump battery pack, rechargeable compact, non-spillable sealed lead non-hazardous 6-volt 3.2-amp hour batteries that will not leak, can be used in portable equipment, VRLA, AGM at low competitive prices

On this page you will find we have hopefully listed all of the required data for you to make a educated decision to support your consideration of a purchase of a new replacement compatible battery for the Alaris Medical 280 SpaceSaver Star Flow Pump, these 6-volt batteries are often seen in portable medical equipment or back up in alarm systems, they are deep cycle capable with a energy storage of 3.2-amp hours, which as you would expect and would require in this type of application, rechargeable, they're sealed and will not spill any liquids, so safe to handle and use indoors as well as more mobile use, they are AGM and VRLA offering a long life, more information on the chemistry of them will be found below

  • Alaris Medical 280 SpaceSaver Star Flow Pump battery replacement

After placing your order and receiving your new battery from us you may will note that they have a good charge in them, but you should still charge it fully before using for the first time, if it's going into a device that is always connected to the mains and has its own charging circuit like a battery backup for monitoring or alarm system then you can miss this step as it will do it for you, you do not need to leave it on for hours on end its almost fully charged, it will probably not take very long at all depending on the charger, just until the charger has indicated that it has finished, do not just install and use without this initial charge, unless the situation is as stated above, doing so can shorten expected life span, it's well worth doing

It's not something that most will even notice but if being used in a portable device it may take a few charges and use in the equipment before a full capacity charge can be reached, it's all part of the normal conditioning process, letting your new batteries sit in a discharged state, even partially is not a good idea, so if being used in a portable device as soon as you have used them put them back on charge, discharging the batteries fully will only reduce their life expectancy, you cannot kick start this kind of battery in that way, it will do them no good and will cost you money in the long run, if it turns out there are periods where the equipment is not being used on a regular basis then ensure the batteries are fully charged before any period of downtime and then topped up every four weeks but do not leave on the charger for more than 24-hours

These batteries are deep cycle capable, which is essential in this type of application, the VRLA and AGM cells will not leak as the acid is combined within a glass matting so no liquid, not-hazardous so suitable for travelling, there is no maintenance required, except of course charging which we have covered on this page.

We have provided the information here purely as a guide, it would be wise to check the code carefully as so many of them are pretty similar so it's easy to make a mistake, you will also find we have listed the relevant dimensions so you can make sure you are ordering the correct one, looking at your old power pack and taking note of the dimensions and anything that may be printed on the side is probably the best thing to do, these 6v 3.2ah batteries are mainly constructed using lead which can easily be recycled, more information on recycling can be found at the foot of this page

Voltage = 6-volts
Capacity = 3.2Ah @20Hr
Chemistry = Pb, sealed lead, VRLA, AGM

There is 1 rechargeable batteries to replace the Alaris Medical 280 SpaceSaver Star Flow Pump the overall dimensions of each battery are
Length = 134mm or 5.27-inches
Width = 34mm 1.33-inches
Height = 60mm or 2.36-inches
Battery layout - from chart below = 1

Alaris Medical 280 SpaceSaver Star Flow Pump battery replacement terminal layout guide


Frequently Asked Questions

Ask us a question

There are no Videos for this particular Product.
View our other help, technical, installation and information videos.

Installation Videos

We do have other Videos, subscribe to our Youtube Channel using the Button below.
Supplementary Files: None available

  • 98% of orders shipped same day for next day working day delivery in UK Mainland
  • FREE Delivery on orders of £45 and over in most of UK Mainland
  • We ship Worldwide, add to cart for delivery cost
  • You can return any order for any reason, in resaleable condition, within 14 days
  • Our full delivery and returns details can be viewed in the footer
Explore
0 item(s), £0.00

0 items