Panasonic TY355C 6v 3.2ah battery replacement sealed lead
Replacement Panasonic TY355C battery pack, rechargeable compact, non-spillable sealed lead non-hazardous 6-volt 3.2-amp hour batteries that will not leak, can be used in portable equipment, VRLA, AGM at low competitive prices

We have tried to list here, and hopefully succeeded on this page all the relevant information to help you make the decision of purchasing a new replacement compatible battery for your Panasonic TY355C, these 6-volt batteries are often seen in portable medical equipment or back up in alarm systems, they are deep cycle capable with a energy storage of 3.2-amp hours, rechargeable and recyclable, the main component used in the manufacture of the cells is lead it follows then that they are a environmentally friendly as can very easily be made into something else, maybe another battery at the end of their life and the time comes for recycling, more information on this can be found on our recycling page

• Panasonic TY355C battery replacement

Upon receipt of your order from us the batteries will be almost fully charged but even so you will still need to complete a charge before first use, if it's going into a device that is always connected to the mains and has its own charging circuit like a battery backup for monitoring or alarm system then you can miss this step as it will do it for you, the period of this initial charge before first use need only be until the charger states it is ready, probably not very long at all, you may well just want to fit them and use the equipment, but do try not miss this first step, if needed that is, it's worth waiting until the first charge has completed and it may well contribute to over life span

You probably will not notice but if you are using in a piece of equipment that requires outside intervention for charging that it will take up to ten charges and associated use in your device before the batteries are capable of taking a few capacity charge, this is normal, after you have used your more portable equipment you should get a charge back into it as soon as you are able, do not leave it sitting around in a partially discharged state for any longer than absolutely necessary, we have heard of people trying to extend battery life by running them all the way down, do not attempt this with this kind of technology, fully discharging your new batteries will only reduce the overall life span and they will need changing earlier, this will cost you money in the long run, if it turns out there are periods where the equipment is not being used on a regular basis then ensure the batteries are fully charged before any period of downtime and then topped up every four weeks but do not leave on the charger for more than 24-hours

The battery type that we are offering here is VRLA and AGM, they need no maintenance, no topping up of fluids, the acid is suspended within a glass matting, they are sealed lead acid and valve regulated with AGM technology, they are not-hazardous and safe to use around the home or in portable devices well as travelling

Check the information carefully to ensure you are ordering the correct battery as many of them have very similar codes, if in doubt the dimensions of the batteries are probably your best guide and take note of anything that may be written on the side of them, the size of is also specified below so you can confirm, these 6-volt 3.2ah batteries are recyclable, the overlaying main constructed content is lead which is very easily transformed into another useful product, maybe even another battery, more information about recycling can be found on our recycling page, link to which is at the foot of this page

Voltage = 6-volts
Capacity = 3.2Ah @20Hr
Chemistry = Pb, sealed lead, VRLA, AGM

There are 1 ready to install batteries for the Panasonic TY355C here is the dimensions of a single battery
Length = 134mm or 5.27-inches
Width = 34mm 1.33-inches
Height = 60mm or 2.36-inches
Battery layout - from chart below = 1