PC1212, PE12V1.2F1 sealed battery pack 12-volt AGM 1.2ah VRLA.
Replacement PC1212, PE12V1.2F1 battery pack, valve regulated sealed lead acid rechargeable 12-volt 1.2ah absorbed glass mat batteries, non-spillable AGM offered at low prices direct from warehouse.
Below you will find we have listed detailed information to help you consider the decision to buy new compatible replacement battery for your PC1212, PE12V1.2F1, with a capacity of 1.2-amp hours, these 12-volt cells are used in many types of application such as portable medical equipment, emergency lighting and even home alarm systems they are also capable of deep cycling, they are safe to be handled and to use indoors or in portable devices as well of course as rechargeable they are made for this kind of application, they are the required VRLA with AGM technology (more information about the qualities of the chemistry of them will be found below) they are recyclable and very environmentally friendly, see our recycle page for details
- PC1212 battery
- PE12V1.2F1 battery replacement
The batteries that you obtain from us will be almost fully charged, but you should still charge them fully before first use, however if it's a battery backup for something that's always connected to the mains like a monitor or maybe a alarm system then you do not need to charge it first as the system will do that for you, while you only need to fulfil the charge until the charger indicates that its ready, it probably will not take long and it is very important so not a step you should overlook, do not just fit them and roll without this initial charge, it will help to extend the battery life overall.
Unless you are a very extended user you will probably not even notice that it can take a number of charge and use in your equipment before a full capacity charge is achieved, this is all part of the conditioning process and quite normal, after you have used your more portable equipment you should get a charge back into it as soon as you are able, do not leave it sitting around in a partially discharged state for any longer than absolutely necessary, do not attempt to discharge the batteries fully, this will not extend the life of them, quite the contrary, it will reduce life span quite drastically so cost you money in the long run, it is important to keep a charge in the batteries for long life, so if there is any period of time where they are not being used then charge before hand and top this up every four weeks but do not leave on a charger for more than 24-hours.
These 12-volt batteries are AGM ( absorbed glass mat ) and VRLA ( valve regulated lead acid ) they are deep cycle and not-hazardous so suitable for use indoors or in portable devices, they will not leak all features that make them useful for use in this kind of application, they of course do not require any maintenance.
Ensure that you order the right battery by carefully checking the information, a lot of them are very similar so it can be easy to make a mistake, if in doubt check the old battery, the dimensions and anything written on the side of them, we have included the physical size so you can double check, This 12-volt 1.2ah product is recyclable it is made mainly of lead which is easily transformed, please ensure they are disposed of properly at a recycling centre once they have completely fulfilled their useful purpose for you, more information about recycling can be found at the foot of this page.
Voltage = 12-volts
Capacity = 1.2Ah @20Hr
Chemistry = sealed lead acid, VRLA, AGM.
You will find a total of 1 ready to install batteries for the PC1212, PE12V1.2F1 the overall size of the batteries are:
Length = 97mm or 3.81-inches
Width = 43mm 1.69-inches
Height = 52mm or 2.04-inches.
