Pride Mobility Laser mobility scooter batteries sealed AGM
Replacement Pride Laser battery pack, set of two standard fit sealed lead acid non-spillable rechargeable batteries for this mobility scooter at low prices direct from warehouse.

This offer for the Pride-Laser mobility scooter is a matched pair of valve regulated sealed lead acid batteries, they will not leak if mounted on the side and can be used for portable devices without fear of spillage.

• Pride Mobility Laser battery

Charge you new batteries fully before fist and as soon as you can after each and every use, if you are not using for a long time then charge every 8-weeks to keep the cells active.

These sealed lead acid batteries (SLA) are non-spillable, non-hazardous and maintenance free, branded by one of the best in the business. We do our best to keep our data as accurate as possible but it should only be used as a guide and you should make your own enquiries as to whether these are the correct batteries for your application.

These replacement batteries have a capacity of 35Ah, as you would expect from a brand leader they are manufactured to a very high standard and can be used in a wide range of applications. According to the manufacturer you can also have the physically larger AGM 50Ah and GEL 40Ah but you should double check with the physical sizes to make sure it will fit.

Chemistry of battery: sealed lead acid, AGM, Pb
Voltage of battery: 12-volt
Capacity = 34Ah @20-Hr, amp hour

There are two batteries in this set for the Pride Mobility Laser mobility scooter standard fit the overall size of each of them are as follows.
length = 195mm
Width = 130mm
Height = 164mm

The physical sizes of the AGM 50ah and GEL 40Ah are slightly different, we have listed them below for your convenience.
Length = 197mm or 7.75-inches
Width = 165mm or 6.49-inches
Height = 175mm or 6.89-inches