Pride Jazzy-1107 battery Powerchair mobility replacement.
Replacement Pride Jazzy-1107 battery pack, rechargeable sealed lead valve-regulated VRLA AGM batteries for this mobility powerchair at low prices.
In this pack, there are a matching pair of 12v batteries. You will need both to provide the 24v required for this scooter. They are for the Pride Jazzy-1107 Powerchair. They are valve-regulated lead-acid, sealed, and AGM, so they will not leak and are not hazardous.
Please ensure before fitting your new batteries into the chair that you turn off the power to the controller and that it is set in drive mode. After fitting, ensure you give the batteries their first charge before using the device. They will come to you almost fully charged, so that it will take a little time. It will take about ten cycles of the battery before it reaches total capacity. This is quite normal. In general use, it is far better to charge after every use and as soon as possible rather than run the batteries down. Not something you should try to do deliberately, as this will shorten the overall life span. If they are not being used for long periods, give them a charge every four weeks.
The product is recyclable, so when they have reached the end of their useful life, please direct them to a recycling centre for processing.
Non-hazardous
Not-spillable
no maintenance is required (except charging, of course).
Chemistry of battery: VRLA, AGM, sealed lead
Voltage: 12v - two batteries combine to produce 24v
Capacity: 35Ah, amp-hour.
There are two 12v batteries in this pack for the Pride Jazzy-1107 Powerchair. We have included the physical size of each battery for your convenience:
Length = 195mm - 7.67-inches
Width = 130mm - 5.11-inches
Height = 155mm - 6.14-inches plus the terminals.
