ES1.2-6 MK rechargeable 6-volt 1.2ah battery replacement AGM VRLA.
Replacement ES1.2-6 MK battery set, valve regulated safe non-spillable 6-volt 1.2ah rechargeable batteries, they are AGM and VRLA at low competitive price direct from warehouse
Below you will find we have entered details of a of new compatible battery you will require for the ES1.2-6 MK, the 6v cells have a energy storage capacity of 1.2-amp hours. they are also capable of deep cycling, which are, as would be of course be required, rechargeable, they are safe to use indoors, non-hazardous, not-spillable AGM and VRLA type of cells, much more information about the qualities of these unique chemistries can be found below.
When your order is delivered to you your new batteries will be almost fully charged, but regardless of this you should still complete a charge them before first use, if it's going into a device that is always connected to the mains like a battery backup for monitoring or alarm system then you can miss this step as it will do it for you, it shouldn't take long, just until the charger lights indicates its ready, if really in doubt overnight will be more than enough but it's doubtful you would need to leave it on the charger that long, you may well be impatient and use the equipment without charging but it's worth waiting until its fully charged and will help extend overall life expectancy.
It's not always apparent but it will take up to ten charges combined with use in your chosen device before a full capacity charge can be achieved, this is just a normal part of the conditioning process, when you have used your portable devices then put the batteries back on charge, you do not want to allow them to sit in a partially discharged state, we have heard of people trying to extend battery life by running them down, fully discharging your new batteries will only reduce the overall life span and they will need changing earlier, this will cost you money in the long run, if it turns out there are periods where the equipment is not being used on a regular basis then ensure the batteries are fully charged before any period of downtime and then topped up every four weeks but do not leave on the charger for more than 24-hours.
These 6-volt batteries are very resilient and can be mounted on the side without any issues so suitable for use in portable devices, deep cycle capable which of course is essential in electric powered devices, no leaking, which means they can be used indoors or medical environments, they are the recommended VRLA type and benefit from AGM technology they are not-hazardous so safe.
So many codes on batteries are almost the same, you should carefully check them before ordering to ensure you are getting the right pack, if in doubt then look at your old one, take a note of the dimensions and anything that is written on the side, this will always be the best information to have, we have also included on the page the dimensions so you can confirm before ordering, the batteries themselves are 6-volt 1.2ah and have a very high lead content so they are recyclable, more detailed information about recycling lead batteries can be found on a link at the foot of this page.
Voltage = 6-volts
Capacity = 1.2Ah @20Hr
Chemistry = Pb, sealed lead, VRLA, AGM.
There are 1 ready to install batteries for the ES1.2-6 MK the physical size of the individual batteries are as follows:
Length = 97mm or 3.81-inches
Width = 24mm 0.94-inches
Height = 51.5mm or 2.02-inches.
