IE12150 Industrial Energy battery non-spillable VRLA 12-volt 18ah
Replacement IE12150 Industrial Energy battery, 12-volt non-spillable sealed lead acid rechargeable batteries, they are safe to use indoors and portable devices, 18-amp hour at low prices direct from warehouse.
The offer on this page as mentioned is for a replacement battery pack for the IE12150 Industrial Energy they are valve regulated sealed 12-volt 18-amp hour and rechargeable. they will not spill due to their safe VRLA and AGM construction so also suitable for portable devices, seen in many different applications mobility scooters where they might be paired up to provide 24v, small jump start packs and UPS systems.
- IE12150 Industrial Energy battery
AGM batteries cab be very handy for portable or transportable devices, they will not leak, not-hazardous so can be used inside, they can be safely used on the side, they do not need topping up with fluid, they need no maintenance, they are valve regulated or VRLA
Your new battery does not need any maintenance in the conventional sense of the word, no topping with fluids, but it does of course need charging, unless it's going into something like a uninterruptible power supply system with its own built in charging circuit that handles the charging itself then charge when you receive the order from us and before first use, charge after every single use and if not using for long periods charge every 4-weeks, keeping your new investment fully charged will be the best way of maintaining a longer life.
We have tried hard to bring you the correct information for this compatible battery from our extensive available resources, but you are of course advised to check the code on your old battery before ordering it will not take long the physical size and its worth reminding yourself where it is and how it comes out and would certainly save days if by not doing so you order the wrong one.
Voltage = 12-volts
Capacity = 18Ah @ 20Hr
Chemistry = Sealed lead, AGM, VRLA.
we are offering one rechargeable batteries as used in the IE12150 Industrial Energy the overall dimensions of each battery are
Length = 181mm or 7.12-inches
Width = 76mm or 2.99-inches
Height = 167mm or 6.57-inches.
We have another battery with the same physical dimensions but rated at 22-amp hour, it may suit your requirements and a very easy upgrade as it will slip straight in to same space, with this extra 4Ah the battery runtime will be longer between charges, if you were fitting it in a electric car it would mean more miles per charge, the link to it will be below.
