Neata NT12-2.3 replacement 12v battery sealed lead AGM
Replacement Neata NT12-2.3 non spill 12v 2.1ah battery pack, safe can be used in portable devices, emergency lighting, alarm systems, valve regulated sealed lead VRLA AGM rechargeable batteries at low cost
When place your and receive an order you will note that the batteries will be almost fully charged when received, but you should still complete a charge before first use, you can skip this step if it's going in something like a alarm system as its always connected to the mains and it will complete this charge for you automatically, you do not need to leave it on for hours on end, it will probably not take very long at all depending on the charger, just until it has finished, this first step is important so do not ignore it, doing so can shorten expected life span
It's not something that most will even notice but it will take a few charges and use in the equipment before a full capacity charge is reached, it's all part of the normal conditioning process, after you have used your batteries you should get a charge back into it as soon as you are able, do not leave it sitting around in a partially discharged state for any longer than absolutely necessary, never try to discharge the batteries, it will not rejuvenate them, with this type of technology it will only mean a shorter life, if for any unforeseen reason they is an extended period where you are not using the batteries make sure they are fully charged first, then recharge every four weeks but do not leave on the charger for more than 24-hours
These 12v batteries are constructed as AGM ( absorbed glass mat ) and VRLA ( valve regulated lead acid ) they are deep cycle and not-hazardous so suitable for use indoors or in portable devices, they will not leak all features that make them useful for use in this kind of application, they of course do not require any maintenance
Voltage = 12v
Capacity = 2.1Ah @20Hr
Chemistry = VRLA, AGM
There are a total of 1 rechargeable batteries to replace the Neata NT12-2.3 the physical size of the individual batteries are as follows
Length = 178mm or 7-inches
Width = 35mm 1.37-inches
Height = 60mm or 2.36-inches
Battery layout - from chart below = 1
