Eaton Powerware 9125-5000G HW FC UPS battery pack replacement.
Replacement Eaton Powerware 9125-5000G HW FC non-spill battery pack, safe can be used in portable devices, UPS backup valve regulated sealed lead VRLA AGM rechargeable batteries at low cost.
- Eaton Powerware 9125-5000G battery
Please find the information on this page to assist you in the renewal of batteries for your Eaton Powerware 9125 5000G HW FC, the onboard energy storage facility also filters the mains input supply before releasing on to your valuable equipment behind it and is powered by way of 12v cells, and comes with 20 x 12-volt batteries and that is what this offer is for which are rechargeable they are the recommended non-spillable safe AGM and VRLA type of cell which would be required in this kind of machine.
Fitting the batteries is quite an easy task to do yourself, you can refer to your manual for the procedure, once you have fitted them the system will want to fully charge the batteries, even though they will come out to you almost charged it will still want to complete the task, with this in mind it will mean that there is a period of time that the system is unable to offer full runtime protection while it is doing this, if you can its best to do this initial charge without any load, we know this may not be convenient in a lot of installations but that is best advise.
In this kind of device you would expect the batteries to last somewhere between two to five years, this will however will vary greatly depending on the conditions or storage and overall use, good ventilation, if it's in a office do not use it as a book shelf, also do not overload, if you can keep the load below 40%, while the system will be more than capable of going higher than that it pays the price of working the battery cell harder which means a shorter life span.
The cells are absorbed glass mat or AGM, they are also valve regulated sealed lead acid or VRLA, this is the recommended type of battery for this installation, they will not leak if mounted on the side so safe to be used in tower or rack mountable configuration with fear of spillage in mission critical applications as well as the home office.
Ensure that you order the right battery by checking the code on your UPS and comparing it to the information here, many are very similar, these hot swap capable batteries are recyclable, more information on this can be found at the bottom on this page on our recycling link.
Voltage = 12v
Capacity = 7Ah @20Hr
Chemistry = AGM, VRLA
Hot swap capable
In this set there is 20 lead acid batteries for the Eaton Powerware 9125 5000G HW FC the dimensions of the individual battery pack are as follows:
Length = 151mm
Width = 65mm
Height = 94mm
We can offer you a 9-amp hour version of this battery size, this will give you a longer runtime between charges, a very simple upgrade with great benefits, the link to this extended version is just a little bit further down the page.
