PowerWalker VFI-10000TCP 3/1, 10120161 battery replacement
Replacement PowerWalker VFI-10000TCP 3/1, 10120161 UPS battery pack, rechargeable batteries for this computer battery backup uninterrupted power supply, no maintenance required.
- Powerwalker VFI-10000TCP 3/1 battery
- Powerwalker 10120161 battery
You are probably visiting this page because your UPS is bleeping away with a not so pleasant tone stating it would like new batteries, this is not something to be wary of but do not delay as its do a job of protecting valuable data behind it, it's not a difficult job and will need to done every few years unless you have money to throw away and buy a new unit, below you will find details of the battery for your Powerwalker VFI-10000TCP 3/1, apart from the electronics board controlling the equipment it is powered by 20-off, 12-volt batteries these are rechargeable and capable of deep cycling which is vital in this sort of installation where they are constantly being used 24-hours a day
The cells are absorbed glass mat or AGM, they are also valve regulated sealed lead acid or VRLA, this is the recommended type of battery for this installation, they will not leak if mounted on the side so could be used in tower or rack mountable configuration with fear of spillage in mission critical applications as well as the home office
Voltage = 12-volts
Capacity = 7Ah @20Hr
Chemistry = AGM, VRLA
This set contains 2 lead acid batteries for the Powerwalker VFI-10000TCP the physical dimensions are as follows
Length = 151mm
Width = 65mm
Height = 94mm
As an easy upgrade path we are able to offer this battery size as a 9ah version, it will slip straight into the same cavity but offer you a longer runtime, the link to this will be a little bit further below
