pbq pbq2.6-12 compatible battery 12v 2.6ah AGM.
Replacement pbq pbq2.6-12 compatible battery, rechargeable 12v 2.6ah AGM sealed batteries with terminals on one end.
This battery is slightly different to others with the same physical size due to the terminals being on the end, quite often seen in mobility and medical applications.
You should always fully charge your battery when it arrives and before first use. If for any reason there will be extended periods where it's not being used regularly then also recharge every six weeks to keep the cells in good order.
If you will be using this replacement pbq pbq2.6-12 battery pack in a piece of equipment that is not always connected to the mains for charging then the best advice we could offer would be to recharge as soon as you can after every use, it will do the cells no good whatsoever if the battery was allowed to sit in a discharged state for any period unnecessarily.
It typically can take up to ten charges and use in the equipment before the cells are capable of accepting a full capacity charge, this is quite normal and of the conditioning process that all rechargeable batteries will go through at the start of their life.
This pbq pbq2.6-12 battery replacement is VRLA and AGM, it is sealed and requires no maintenance except of course charging which we have covered above, it will not spill and can be mounted on its side.
Chemistry of battery: sealed lead acid, VRLA, AGM, Pb
The voltage of the battery is 12v.
Capacity: 2.6Ah @20-Hr, amp hour.
Terminals are situated at one end; please see picture, T1/F1, 4.8mm spade type.
This set has one rechargeable battery to replace the pbq pbq2.6-12. The physical dimensions of each battery are:
Length = 178mm or 7-inches
Width = 35mm 1.37-inches
Height = 60mm or 2.36-inches (67mm with terminals).
