Nationwide mobility Mermaid Bath Belt battery 24v.
Replacement Nationwide mobility Mermaid Bath Belt battery pack 24v, for DIY replacement or we can do it for you.
The Nationwide mermaid is a motorised belt that when activated acts as a lift to aid users to get in and out of a bath. When not in use the belt can easily be retracted. The whole unit is generally a stand-alone device, just needs good fixing to the wall and the belt base, which is normally the floor.
- Nationwide Mermaid Bath Belt battery
The battery pack is pulled out from the left-hand side of the case and charged outside of the bathroom for safety. The battery box has a pair of batteries inside to output 24v, which can be changed for new ones when required. Changing the batteries is not overly complicated, but they are a snug fit so the correct ones must be used else you will not get them back into the box; we always use reinforced tape to keep the cables tight when the batteries are put in. Usually a T10 star type; we would think as long as you have a driver and some tape, it would take most people no more than ten minutes to fit, but only if you have the right sized batteries. We may be able to fit them for you if required; see above, there may also be a video to explain the procedure.
Now you have put new batteries in your battery box, and saved a considerable amount of money over buying a completely new box for five minutes of your time, you need to know how to look after them. While it will almost certainly not be convenient, the very best way is to charge them when they arrive. Charge them after every use and if not being used then recharge them every four weeks. Only leave it on the charger until indicates it is full and remove it. Now, this is probably not the way most will treat them, but at least if you know the best way you can make a educated descision.
Voltage: 12v (two batteries combine to make 24v)
Chemistry = valve-regulated lead acid, VRLA, AGM
Two batteries are required for the Nationwide Mobility Mermaid Bath Belt lift, and that’s precisely what we are offering.
Fitting service for Nationwide Mermaid Bath Belt batteries:
The battery fitting is not difficult, but we understand that not everyone is comfortable doing such a job and might not even have the tools to handle it or have mobility issues.
We can do this for you. At the top of the page, under available options, you can select to include fitting with your batteries. If selected, we will email you the address to send your box to, along with packing and further instructions. Upon receipt of your parcel, we will then inspect & fit the new batteries for you and check that they output the correct voltage. If you want us to check your charger, too, at the same time, then we can at no extra fee. These are normally turned around the same working day, depending on what time it turns up.
