Johnson Controls MPS1233 battery VRLA sealed lead 12-volts
Replacement Johnson Controls MPS1233 12-volt battery, rechargeable 34ah sealed lead non-hazardous batteries, will not leak, can be used in portable equipment, VRLA, AGM at low competitive prices

Below you will find more details of our replacement battery for the Johnson Controls MPS1233 which is 34-amp hour running at 12-volts, sealed lead, valve regulated as such they are non-spillable and can be used in portable transportable devices like mobility scooters or fixed as in UPS systems, they are capable of deep cycling

• Johnson Controls MPS1233 battery

These AGM batteries can safely be mounted in hard to reach awkward places without the fear of leakage, they are sealed lead, they will require no maintenance, no topping up with fluids, valve regulated or VRLA and not-hazardous for safety

The details of this compatible battery pack are offered purely as a guide, you should of course check the codes and physical dimensions of your old battery before ordering which are listed below, its fine also to use this battery to replace 30, 31, 32, 33 and 35ah versions

Voltage = 12-volts
Capacity = 34Ah @ 20Hr
Chemistry = AGM, VRLA, Pb, non-spillable

There is a total of one lead acid batteries for the Johnson Controls MPS1233 here is the dimensions of a single battery
Length = 195mm or 7.67-inches
Width = 130mm or 5.12-inches
Height = 156mm or 6.14-inches

Your new battery will be delivered to you in a almost fully charged state, but you should still give a it a full charge when you receive it and before first use, recharge after every use and if not using it for long periods then again every four weeks

If you require two batteries there is a link below, it will be more cost effective and if you are using for a mobility scooter or wheelchair you can make a online declaration for VAT relief