IBT Bt4-12 BT4.5-12 BT5-12 replacement 12v battery sealed lead.
Replacement IBT Bt4-12 BT4.5-12 BT5-12 rechargeable batteries, 12v 4.5ah valve regulated sealed lead acid non-spillable safe not-hazardous battery pack, absorbed glass mat AGM cells, low, competitive price.
- IBT BT4-12 battery
- IBT BT4.5-12 battery
- IBT BT5-12 battery
On this page, you will find we have listed all of the required relevant data to support your consideration of a purchase of a new replacement compatible battery for the IBT Bt4-12 BT4.5-12 BT5-12.
They have an energy storage capacity of 4.5ah. They are used in many applications such as portable medical equipment, UPS systems, emergency lighting and even lawn mowers. The cells are 12v and capable of deep cycling. Being constructed as AGM and VRLA, they are rechargeable. They are safe to handle and used indoors or in portable devices. They are also recyclable. The main component of the cells is lead, so they are very easily recycled and environmentally friendly; more information can be found on our recycle page.
The batteries you receive from us will be almost fully charged, but you should still charge them before first use. this will not be necessary only if being fitted in something that is always connected to the mains, like a UPS system which will do this job for you. The charger will have LED lights which will indicate whether it is still charging or not. You only need to charge them until they are ready, probably not very long at all, do not just use them without this initial charge, unless as stated above. Doing so can shorten the expected life span, so it's well worth doing.
You probably will not notice it, but it can take up to ten charges and use your equipment before you can receive and hold a total capacity charge in your batteries. This is quite a normal part of the conditioning process. Each time you have used your battery in a portable device, you should put it back on charge as soon as possible and not leave it in a semi-discharged state. We have heard of people trying to extend battery life by running them down, but it will not work with this type of battery. It will only shorten life. If there are extended periods where the batteries are not being used, then ensure they are fully charged beforehand and then recharged every four weeks, but you should not leave them on the charger for more than twenty-four hours.
These 12v batteries are constructed as AGM (absorbed glass mat) and VRLA (valve-regulated lead acid). They are deep cycle and not hazardous, so they are suitable for use indoors or in portable devices. They will not leak all features that make them useful for use in this kind of application. They, of course, do not require any maintenance.
So many codes on batteries are almost the same. You should carefully check them before ordering to ensure you get a suitable pack. If in doubt, look at your old one, take note of the dimensions and anything written on the side. This will always be the best information to have. We have also included on the page the measurements so you can confirm them before ordering. This 12v 4.5ah battery is, as you would expect, recyclable. More detailed information on recycling can be found at the foot of this page.
Voltage = 12v
Capacity = 4.5Ah @20Hr
Chemistry = Pb, sealed lead, VRLA, AGM
Compatible battery to replace the IBT Bt4-12 BT4.5-12 BT5-12. The dimensions are as follows
Length = 90mm or 3.54-inches
Width = 70mm 2.75-inches
Height = 101mm or 3.97-inches
If you would like to upgrade your batteries, we can offer a 5ah, the same physical size, just with 6.35mm terminals, so it's just a matter of changing them over, and you will get more energy per charge. The link to these will be in the alternative tab or selectable in the available options above.
