Ring RPP109 battery replacement for Ring jump starters.
Compatible replacement RPP109 battery for Ring jump starter and power packs with upright nut and bolt terminal.
This is an AGM sealed lead battery pack, valve regulated and maintenance free. The battery is designed not to leak, even when mounted sideways, making it ideal for power packs and jump starters.
These batteries, equipped with a nut and bolt fitting, are not commonly available, so they require careful maintenance. Ensure they are fully charged upon arrival and initial use, which should be quick since they'll arrive nearly fully charged. If the battery is used infrequently—perhaps during the off-season in a shed—remember to recharge it every six weeks to maintain cell health.
The battery will typically need up to ten cycles of charging and use before it can hold a full capacity charge. This conditioning is a normal part of the lifespan of rechargeable batteries.
Although the battery is maintenance-free, it should not be neglected. Following the charging tips provided in your manual will help avoid premature battery failure. Charge after every use, especially when installed into a power pack is the biggest rule that you should take away from this page.
Voltage = 12-volts
Capacity = 8.8Ah @20Hr
Chemistry = AGM, VRLA
The battery will fit fairly snug within the jump starter so we have provided the dimensions below so you can be sure it fits.
Length – 151mm
Width – 65mm
Height – 94mm, 106mm with the terminals, M5 bolt hole.
