Ring RPP103 battery replacement jump start pack.
Compatible replacement RPP103 battery for Ring jump start power packs with upright nut and bolt terminal.
This is an AGM sealed lead battery pack, valve regulated and maintenance free. The battery will not leak even when mounted on its side side, making it ideal for power packs and jump starters.
These batteries, equipped with a nut and bolt fitting, are not commonly available, so they require careful maintenance. Ensure they are fully charged upon arrival and initial use, which should be quick since they'll arrive nearly fully charged. If the battery is not used often then also recharge every six weeks.
The battery will typically need up to ten cycles of charging and use before it can hold a full-capacity charge. This conditioning is normal during the lifespan of rechargeable batteries.
There is an option to upgrade this battery to the 9ah version for more energy storage at the same physical size. This can be selected from the easy upgrade drop-down menu in the available options above.
Although the battery is maintenance-free, it should not be neglected. Following the charging tips provided in your manual will help avoid premature battery failure. The biggest rule you should take away from this page is to charge after every use, especially when installed into a power pack.
Voltage = 12v
Capacity = 7Ah @20Hr
Chemistry = AGM, VRLA, Pb
The physical size of the Ring RPP103 battery is as follows
Length – 151mm
Width – 65mm
Height – 94mm, 106mm with the terminals, M5 bolt hole.
